Skip to content →

PRGs and D64s – Hotloading and Parsing

To be able to run PRGs (programs) and D64s (disk images), we will need to be able to load them. Usually, we would implement the 1541 Floppy Drive now, but we will postpone that for later, since this will take some time (and decoding).

PRG

To load PRGs, we take the input file, and check the first two bytes in little Endian order, to see the location in memory, where the PRGs wants to be loaded to.

void loadPRG(string f) {
	uint8_t buf[1];
	std::vector<uint8_t> d;
	FILE* file = fopen(f.c_str(), "rb");
	while (fread(&buf[0], sizeof(uint8_t), 1, file)) {
		d.push_back(buf[0]);
	}
	fclose(file);
	printf("d size %x - %d\n", d.size(), d.size());
	for (uint16_t i = 2; i < d.size(); i++) {
		memory[((d.at(1) << 8) | d.at(0)) - 2 + i] = d.at(i);
	}
	setTitle(f);
}
This PRG wants to be loaded to 0x0801 and later

Once we have a PRG loaded to its location, all we need to do is “RUN“, to execute it.

PRG loading and RUN-ning

D64

The D64 images consist of multiple PRGs at best. So, we will need to be able to pars the D64 format, to be able to read the PRGs the D64 offers. Using LIST will show the directory listing of the currently loaded D64.

I really recommend using D64 Editor (http://www.d64editor.com) to create Menus for your own D64 images.

I made a complete Parser for the D64 file format, which I am going to post here. It works very well so far. Remember, this D64 is being hotloaded, and does not go the usual way through a 1541 Drive (which we will implement later on), so some things are tampered with, so BASIC can properly read it.

#include <string>
#include <vector>
#include <iostream>
using namespace std;

struct Entry {
	bool available = false;
	uint8_t next_track = 0x00;
	uint8_t next_sector = 0x00;
	string file_type = "";
	uint8_t start_track = 0x00;
	uint8_t start_sector = 0x00;
	string pet_name = "";
	uint32_t adress_start = 0x00;
	uint32_t adress_end = 0x00;
	uint8_t sector_size = 0x00;
	uint8_t sectors = 0x00;
};

/*
	Track   Sectors/track   # Sectors   Storage in Bytes
        -----   -------------   ---------   ----------------
         1-17        21            357           7820
        18-24        19            133           7170
        25-30        18            108           6300
        31-40(*)     17             85           6020
                                   ---
                                   683 (for a 35 track image)

  Track #Sect #SectorsIn D64 Offset   Track #Sect #SectorsIn D64 Offset
  ----- ----- ---------- ----------   ----- ----- ---------- ----------
    1     21       0       $00000      21     19     414       $19E00
    2     21      21       $01500      22     19     433       $1B100
    3     21      42       $02A00      23     19     452       $1C400
    4     21      63       $03F00      24     19     471       $1D700
    5     21      84       $05400      25     18     490       $1EA00
    6     21     105       $06900      26     18     508       $1FC00
    7     21     126       $07E00      27     18     526       $20E00
    8     21     147       $09300      28     18     544       $22000
    9     21     168       $0A800      29     18     562       $23200
   10     21     189       $0BD00      30     18     580       $24400
   11     21     210       $0D200      31     17     598       $25600
   12     21     231       $0E700      32     17     615       $26700
   13     21     252       $0FC00      33     17     632       $27800
   14     21     273       $11100      34     17     649       $28900
   15     21     294       $12600      35     17     666       $29A00
   16     21     315       $13B00      36(*)  17     683       $2AB00
   17     21     336       $15000      37(*)  17     700       $2BC00
   18     19     357       $16500      38(*)  17     717       $2CD00
   19     19     376       $17800      39(*)  17     734       $2DE00
   20     19     395       $18B00      40(*)  17     751       $2EF00
*/

struct D64Parser {

	std::vector<string> FILE_TYPE;
	unsigned char data[0xf0000];
	string filename;
	string diskname;
	std::vector<Entry> entries;
	const uint32_t STARTS[41] = {
		0,
		0x00000, 0x01500, 0x02a00, 0x03f00, 0x05400, 0x06900, 0x07e00, 0x09300,
		0x0a800, 0x0bd00, 0x0d200, 0x0e700, 0x0fc00, 0x11100, 0x12600, 0x13b00,
		0x15000, 0x16500, 0x17800, 0x18b00, 0x19e00, 0x1b100, 0x1c400, 0x1d700,
		0x1ea00, 0x1fc00, 0x20e00, 0x22000, 0x23200, 0x24400, 0x25600, 0x26700,
		0x27800, 0x28900, 0x29a00, 0x2ab00, 0x2bc00, 0x2cd00, 0x2de00, 0x2ef00
	};

	void init(string f) {

		FILE_TYPE.push_back("DEL");
		FILE_TYPE.push_back("SEQ");
		FILE_TYPE.push_back("PRG");
		FILE_TYPE.push_back("USR");
		FILE_TYPE.push_back("REL");
		entries.clear();
		filename = f;
		FILE* file = fopen(filename.c_str(), "rb");
		uint32_t pos = 0;
		while (fread(&data[pos], 1, 1, file)) {
			pos++;
		}
		fclose(file);

		//	init all available lines
		uint32_t base_dir = 0x16600;
		for (uint16_t i = 0; i < 0x1200; i += 0x20) {
			Entry entry;
			entry.next_track = data[base_dir + i];
			entry.next_sector = data[base_dir + i + 1];
			entry.file_type = (data[base_dir + i + 2] > 0x80 && data[base_dir + i + 2] < 0x84) ? FILE_TYPE.at(data[base_dir + i + 2] - 0x80) : "";
			entry.start_track = data[base_dir + i + 3];
			entry.start_sector = data[base_dir + i + 4];
			entry.pet_name;
			for (uint16_t j = 5; j < 0x15; j++) {
				entry.pet_name += data[base_dir + i + j];
			}
			entry.sector_size = (uint8_t)(data[base_dir + i + 0x1e] + (data[base_dir + i + 0x1f] * 256));
			entry.available = (entry.file_type != "");
			
			entry.sectors = 21;
			if (entry.start_track > 17 && entry.start_track < 25)
				entry.sectors = 19;
			else if (entry.start_track > 24 && entry.start_track < 31)
				entry.sectors = 18;
			else if (entry.start_track > 30)
				entry.sectors = 17;
			entry.adress_start = STARTS[entry.start_track] + entry.start_sector * 256;
			entry.adress_end = entry.adress_start + entry.sector_size * 256;
			entries.push_back(entry);
		}
		diskname = "";
		for (uint8_t i = 0x90; i < 0xa0; i++) {
			diskname += data[STARTS[18] + i];
		}

	}

	std::vector<uint8_t> dirList() {
		uint8_t lc = 0x1f;
		uint8_t lh = 0x08;
		std::vector<uint8_t> r{
			0x1f, 0x08, 0x00
		};
		r.push_back(0x00);												//	HEADLINE 0
		r.push_back(0x12);												//	HEADLINE BOLD ?
		r.push_back(0x22);												//	"
		for (uint16_t i = 0; i < diskname.size(); i++) {
			r.push_back(diskname.at(i));
		}
		r.push_back(0x22);												//	"
		for (uint16_t i = 0; i < 24 - diskname.size() - 2; i++) {
			r.push_back(0x20);											//	FILLING SPACES
		}
		r.push_back(0x00);
		for (uint16_t i = 0; i < entries.size(); i++) {
			if (entries[i].available) {
				if ((lc + 0x20) > 0xff)
					lh++;
				lc += 0x20;
				r.push_back(lc);										//	Line separation
				r.push_back(lh);										//	Line separation
				r.push_back(entries[i].sector_size);					//	SIZE
				r.push_back(0x00);
				string f = std::to_string(entries[i].sector_size);
				for (uint16_t j = 0; j < 4 - f.size(); j++) {
					r.push_back(0x20);									//	SPACE
				}
				r.push_back(0x22);										//	"
				for (uint16_t j = 0; j < entries[i].pet_name.size(); j++) {
					r.push_back(entries[i].pet_name.at(j));				//	NAME
				}
				r.push_back(0x22);										//	"
				r.push_back(0x20);										//	SPACE
				for (uint16_t j = 0; j < entries[i].file_type.size(); j++) {
					r.push_back(entries[i].file_type.at(j));			//	FILE_EXT
				}
				for (uint16_t j = 0; j < 26 - entries[i].pet_name.size() - 5 - (4 - f.size()); j++) {
					r.push_back(0x20);									//	FILLING SPACES
				}
				r.push_back(0x00);
			}
		}
		r.push_back(0x1d);
		return r;
	}

	std::vector<uint8_t> getData(uint8_t row_id) {
		std::vector<uint8_t> ret(entries.at(row_id).sector_size * 0x100);
		uint16_t c = 0;
		uint32_t next_track = entries.at(row_id).start_track;
		uint32_t next_sector = entries.at(row_id).start_sector;
		while(c < entries.at(row_id).sector_size) {
			uint32_t a_adr = STARTS[next_track] + next_sector * 256;
			for (uint16_t i = 0; i < 254; i++) {
				ret[c * 254 + i] = data[a_adr + i + 2];
			}
			next_track = data[a_adr];
			next_sector = data[a_adr + 1];
			c++;
		}
		return ret;
	}

	bool filenameExists(string f) {
		for (uint16_t i = 0; i < entries.size(); i++) {
			cout << entries.at(i).pet_name << " - " << f << "\n";
			if (entries.at(i).pet_name == f)
				return true;
		}
		return false;
	}

	std::vector<uint8_t> getDataByFilename(string f) {
		Entry selected;
		for (uint16_t i = 0; i < entries.size(); i++) {
			if (entries.at(i).pet_name == f)
				selected = entries.at(i);
		}
		uint16_t c = 0;
		std::vector<uint8_t> ret(selected.sector_size * 0x100);
		uint32_t next_track = selected.start_track;
		uint32_t next_sector = selected.start_sector;
		while (c < selected.sector_size) {
			uint32_t a_adr = STARTS[next_track] + next_sector * 256;
			for (uint16_t i = 0; i < 254; i++) {
				ret[c * 254 + i] = data[a_adr + i + 2];
			}
			next_track = data[a_adr];
			next_sector = data[a_adr + 1];
			c++;
		}
		return ret;
	}

	void printAll() {
		cout << "\t\t" << diskname << "\n";
		for (uint16_t i = 0; i < entries.size(); i ++) {
			if (entries.at(i).available) {
				cout << entries.at(i).file_type << "\t";
				cout << hex << +entries.at(i).start_track;
				cout << "/";
				cout << hex << +entries.at(i).start_sector << "\t";
				cout << entries.at(i).pet_name << "\t" << dec << entries.at(i).sector_size;
				cout << "\t" << hex << entries.at(i).adress_start << " -> " << hex << entries.at(i).adress_end << "\n";
			}
		}
	}
};

With the given D64Parser, we need to implement a few KERNAL Hooks. Those are needed so we can intercept the SETNAM and the LOAD … ,8,1 commands, the get the actual filename (for the UI) and load the appropriate PRG into memory.
These hooks will be useless, once we have a proper drive emulation.

if (memtype_e000_ffff == MEMTYPE::KERNAL) {
/*
		KERNAL HOOKS
*/
//	SETNAM hook
if (adr == 0xffbd) {
	LOAD_FILE = "";
	printf("SETTING NAME y: %x x: %x\n", getCPURegs().Y, getCPURegs().X);
	for (int i = 0; i < 16; i++) {
		LOAD_FILE += memory[((getCPURegs().Y << 8) | getCPURegs().X) + i];
		cout << LOAD_FILE << "<-- FILENAME";
	}
}
//	LOAD ,8,1 HOOK
if (adr == 0xf52e || adr == 0xf4de) {
	if (parser.filenameExists(LOAD_FILE)) {
		clearCarry();		//	File exists
		cout << "File exists " << LOAD_FILE << "\n";
		loadPRGFromDisk(LOAD_FILE);
	}
	else {
		setCarry();			//	File does not exist
		cout << "File does not exist " << LOAD_FILE << "\n";
	}
}
return kernal[(adr % 0xe000) & 0x1fff];
}

Now, we can actually load D64s and load PRGs from those disk images.

Published in Uncategorized

Comments

Leave a Reply